Thursday, August 10, 2017

Change pixel dimensions of an image

Change pixel dimensions of an image



Changing a picture's pixel measurements influences its onscreen estimate as well as its picture quality and its printed attributes—either its printed measurements or its picture determination. 

1. Pick Image > Image Size

2. To keep up the present proportion of pixel width to pixel stature, select Constrain Proportions. This choice naturally refreshes the width as you change the tallness and the other way around. 

3. Under Pixel Dimensions, enter values for Width and Height. To enter values as rates of the present measurements, pick Percent as the unit of estimation. The new record estimate for the picture shows up at the highest point of the Image Size discourse box, with the old document measure in enclosures. 

4. Ensure that Resample Image is chosen, and pick an addition strategy. 

5 .On the off chance that your picture has layers with styles connected to them, select Scale Styles to scale the impacts in the resized picture. This alternative is accessible just in the event that you chose Constrain Proportions. 
6. When you get done with setting alternatives, click OK.

Note:
For best results when you produce a smaller image, downsample and apply the Unsharp Mask filter. To produce a larger image, rescan the image at a higher resolution.

Change the print measurements and determination 



While making a picture for print media, it's valuable to indicate picture measure regarding the printed measurements and the picture determination. These two estimations alluded to as the recorded measure, decide the aggregate pixel number and accordingly the document size of the picture; archive estimate likewise decides the base size at which a picture is put into another application. You can additionally control the size of the printed picture utilizing the Print charge; in any case, transforms you make utilizing the Print summon influence just the printed picture, not the record size of the picture document. 

In the event that you turn on resampling for the picture, you can change print measurements and determination autonomously (and change the aggregate number of pixels in the picture). On the off chance that you kill resampling, you can change either the measurements or the determination—Photoshop alters the other esteem consequently to protect the aggregate pixel tally. For the most astounding print quality, it's for the most part best to change the measurements and determination in the first place, without resampling. At that point resample just as fundamental. 

1. Pick Image > Image Size

2. Change the print measurements, picture determination, or both: 
  • To change just the print measurements or just the determination and alter the aggregate number of pixels in the picture proportionately, select Resample Image and after that pick an interjection technique. 
  • To change the print measurements and determination without changing the aggregate number of pixels in the picture, deselect Resample Image. 
3. To keep up the present proportion of picture width to picture stature, select Constrain Proportions. This choice consequently changes the width as you change the stature and the other way around. 

4. Under Document Size, enter new esteems for the tallness and width. On the off chance that coveted, pick another unit of estimation. Note that for Width, the Columns alternative uses the width and canal sizes indicated in the Units and Rulers inclinations. 

5. For Resolution, enter another esteem. On the off chance that coveted, pick another unit of estimation. 

Note: 
To reestablish the underlying esteems showed in the Image Size exchange box, hold down Alt (Windows) or Option (Mac OS), and snap Reset.

Try to edit your picture with photo editor!

Friday, August 4, 2017

8 Photo editing tips for stunning photographs

When it comes to post-processing, Lightroom, Adobe Camera Raw, and Photoshop are professional photographers’ favorites. That’s why this article will offer few useful tips on these most popular photo editing programs. So, without further ado, let’s begin our list of photo editing tips that will upgrade your amazing shots.

1. SPEEDING SIMPLE PROCESSES


Without a doubt, one of the main issues concerning photo editing is the workflow. Sometimes having to edit even just a couple of photos can turn into hour-long efforts. The process of opening, editing, and saving can become a pain.
Lightroom and Adobe Camera Raw simplified this process by utilizing a series of shortcut keys. By pressing the ‘Cmd+C’ or ‘Ctrl+Shift+C’ (for Copy options) and ‘Cmd+V’ or Ctrl+Shift+V’ (for Paste settings) commands, Lightroom’s software helps to save a lot of time for such remedial tasks.

2. CAMERA RAW FILTER


Photoshop CC has the option of enabling the Camera Raw interface. As such fast layer editing can be done in Photoshop. Simply select the layer, then go to Filter > Camera Raw Filter.
In order to return to the Camera Raw Filter at any time to fine-tune the photos, first convert the layer to a Smart Object using Filter > Convert for Smart Filters. This will prevent destructive edits.


3. LEARN ABOUT CAMERA AND LENS ADJUSTMENTS


It’s best, to begin with learning some of ACR and Lightroom’s panels before engaging in Basic adjustments. For example, before you make any substantial changes to color and contrast, check the Camera Calibration panel.
The Lens Corrections tab and the Enable Lens Profile Corrections option are worth checking out. Especially if you use wide-angle lenses, the automatic lens adjustments might push some areas of the image out of the frame. It’s a good idea to check these before cropping the image.

4. MAKE USE OF VARIOUS SHORTCUTS


I simply cannot stress this enough. Not only does it save you time, but it also offers a better command of the software.
One of the most used tools, the zooming can be simplified by pressing and holding H. In Photoshop this will create an instant zoom. You can also hold the space bar to temporarily switch to the Hand Tool, dragging the image around to verify details in other areas.

5. CREATE MORE VIVID SKIES


By utilizing the HSL option in Adobe Camera Raw or Lightroom you can give a subtle boost in contrast between a blue sky and a cloudy one. To do so, select Luminance and then drag the Blue slider to the left to darken the sky. Do not over use it, however, or the edges of the clouds and other objects might intrude into the sky.


You could employ various other techniques such as applying a digital Graduated Filter, boosting the Clarity or Curves or increase the Vibrance or Saturation. Another useful option is the Targeted Adjustment Tool, which can be used directly on the image. Simply select it from the ACR toolbar or by clicking on the ‘bullseye’ icon at the top of the HCL panel in Lightroom. Afterward, simply click and drag on dark areas.

6. STYLIZING PHOTOS


If you wish to apply a more stylish look to your photographs the following steps might prove useful.
Begin by uploading your photo in Photoshop and select the Brightness/Contrast panel.
Adjust Brightness to +25 and Contrast to +35. Set Saturation to -25.
Then adjust the Curves layer.
You can first choose Red. Select and drag down a little the center of the red line.
Then move the Blue line upward.
Lastly, select and move up a little the Green Bar.
Finish by selecting the Soft Light blending mode.
To complete, we just need to add two Solid Color adjustment layers. Select a pale yellow color and then set its blending mode to Overlay. Set Opacity to 35%. For the second color layer, you can type ‘f000ff’. Select Screen as its blending mode and Opacity to 30%.



7. EXPERIMENT WITH PRESET SETTINGS


The Presets Panel is located on the left of the interface after you click on the Develop Module. The color presets found there are excellent for experimenting. If you find yourself in a pinch and need to undo an effect, safely scroll down to the History palette. There you can click back through history states. Make sure you go to Lightroom Effects Presets and select Light Grain.

8. BE SELECTIVE WHEN USING APPLY LEVELS


Adjustment Layers have the feature of being accompanied by a Layer Mask. This can be helpful when hiding parts of the tweak. By simply selecting the Brush tool and continue painting over tweaked parts with black. You can also employ the command Cmd/Ctrl+I to make the Layer Mask black, then paint with white to reveal the tweak.
By applying these Levels as Adjustment Layers you can, therefore, mask to restrict the effect to certain areas of the image.
There you have it, a short list of tips for photography enthusiasts wishing to improve their editing skills. I hope my article proves to be enjoyable and useful to you. For more tips on how to make spectacular photographs be sure to check out more interesting photography tips and techniques on picturecorrect.com.
I always encourage my readers to search for inspiration. The web is such a resourceful tool when it comes to editing tips and ideas. If, for instance, you are looking for creative editing tricks to improve your landscape photography, check out this post on virtualphotographystudio.com. Street photography is another popular niche. You can have a look at this article on picturecorrect.com and learn how to create stunning urban landscape photography.

Try to edit your picture with photo editor now!

Change pixel dimensions of an image

Change pixel dimensions of an image Changing a picture's pixel measurements influences its onscreen estimate as well as its pic...